FUGA POOL
Joint Filler - Flexible For pools
High performance, cement-based, flexible joint sealant suitable for 1-6 mm joint gaps, resistant to pool chemicals
Scope of application
It is used for filling the joint gaps between 1-6 mm of coating materials such as ceramic, granite, cotto, clinker, glass mosaic, marble natural stone, indoors and outdoors. In wet areas such as pools, water tanks, Saunas, spas, bathrooms, exterior Facades underfloor heating systems. In places where sudden heat transformations occur, horizontally and vertically. It gives excellent results in applications. .
Public works item No : 04.380/054
- TSEN 1388 certified CG 2 WA / class.
- C: cement based
- G: Grouting
- 2: High performance Absorption Reduced water Absorption
- A: high Abrasion Resistance
General information
| Appearance | white or colored very fine powder |
| Shelf Life | 12 months in dry conditions in its unopened Package |
| packaging | 5 kg polyethylene bag. 20 kg kraft bags. |
Application and Performance Information
| Mixing Ratio | 6.0-6.84 water/20 kg powder.1.5-1.71 water/5kg powder |
| pot Life (EN 1015-9) | 1 hour |
| Commissioning Time | 1 day |
| Consumption (Average) | See Grouting Consumption chart |
| Flexural Strength (EN 12808-3) | ≥ 2.5 N/mm² |
| Bending Ability After Freez-Thaw Cycle. (EN 12808-3) | ≥ 2.5 N/mm |
| Compressive strength (EN 12808-3) | 15 N/mm² |
| Compression capacity After Freeze-Thaw cycle (EN 12808-3) | ≥ 15 N/mm2 |
| Wear Resistance (EN 12808-3) | < 1000mm |
| Shrinkage (EN 12808-4) | ≤3 mm/m |
| water Absorption 30 min/4 hours (EN 12808-5) | <29/ ≤ 5g |
| Temperature Resistance | (-30℃) -(+80°C) |